Author Topic: ช่วยด้วยครับ ASA5505  (Read 15127 times)

0 Members และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

aekbluefog

  • Layer 1
  • *
  • Posts: 8
  • จิตพิสัย +0/-0
ช่วยด้วยครับ ASA5505
« on: 08 มกราคม , 2013, 09:40:14 am »
หลังจากที่ผมทำการเคลียร์ password และค่า configurations ของ asa5505 เรียบร้อยแล้วพอทำการ config อีกครั้ง ปรากฎว่าไม่สามารถ save ค่า config ได้ พอทำการรีสตาร์ตเครื่องหรือปิดแล้วเปิดขึ้นมาอีกครั้งค่า config ที่ config ไว้หายหมดเลยครับ ซึ่งมันจะขึ้นข้อความตามนี้ครับ

Ignoring startup configuration as instructed by configuration register.

INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201301080119.log'
Type help or '?' for a list of available commands.

ผมต้องแก้ปัญหายังไงต่อไปครับ...ขอบคุณมากครับ

fairy

  • Head Master
  • Layer 7
  • *
  • Posts: 2177
  • จิตพิสัย +34/-1
    • ucbook
Re: ช่วยด้วยครับ ASA5505
« Reply #1 on: 08 มกราคม , 2013, 10:03:16 am »
ยังไม่ได้แก้กลับครับ ลองแก้ใหม่



Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Boot interrupted.                             


Use ? for help.

rommon #0> confreg
Current Configuration Register: 0x00000001

Configuration Summary:

  boot default image from Flash

Do you wish to change this configuration? y/n [n]: n

rommon #1> confreg 0x41
Update Config Register (0x41) in NVRAM...

rommon #2> boot
Launching BootLoader...

Boot configuration file contains 1 entry.


Loading disk0:/ASA_7.0.bin... Booting...

###################

...

Ignoring startup configuration as instructed by configuration register.

Type help or '?' for a list of available commands.

hostname> enable
Password:
hostname# configure terminal
hostname(config)# copy startup-config running-config
Destination filename [running-config]?
Cryptochecksum(unchanged): 7708b94c e0e3f0d5 c94dde05 594fbee9

892 bytes copied in 6.300 secs (148 bytes/sec)

hostname(config)# enable password NewPassword
hostname(config)# config-register 0x1
hostname(config)# reload
แนะนำหนังสือดีๆ จาก UCBOOK
http://www.ebooks.in.th/ucbook

CCNA Labs Walkthrough book one (คู่มือตัวอย่าง CCNA พร้อมเฉลย เล่มหนึ่ง)
http://www.ebooks.in.th/ebook/3670/

CCNA Labs Walkthrough book two
http://www.ebooks.in.th/ebook/5137/

--- CISCO CCNA LAB SOLUTION CCNP ---

aekbluefog

  • Layer 1
  • *
  • Posts: 8
  • จิตพิสัย +0/-0
Re: ช่วยด้วยครับ ASA5505
« Reply #2 on: 08 มกราคม , 2013, 10:19:19 am »
ยังไม่ได้แก้กลับครับ ลองแก้ใหม่



Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Boot interrupted.                             


Use ? for help.

rommon #0> confreg
Current Configuration Register: 0x00000001

Configuration Summary:

  boot default image from Flash

Do you wish to change this configuration? y/n [n]: n

rommon #1> confreg 0x41
Update Config Register (0x41) in NVRAM...

rommon #2> boot
Launching BootLoader...

Boot configuration file contains 1 entry.


Loading disk0:/ASA_7.0.bin... Booting...

###################

...

Ignoring startup configuration as instructed by configuration register.

Type help or '?' for a list of available commands.

hostname> enable
Password:
hostname# configure terminal
hostname(config)# copy startup-config running-config
Destination filename [running-config]?
Cryptochecksum(unchanged): 7708b94c e0e3f0d5 c94dde05 594fbee9

892 bytes copied in 6.300 secs (148 bytes/sec)

hostname(config)# enable password NewPassword
hostname(config)# config-register 0x1
hostname(config)# reload
ขอบคุณมาก ๆ ครับ ได้แล้วครับ